-------------------------------------------------------------------------------------------------------
Application
The cutting machine is suitable for cutting tube, ribbon/webbing/belt, cable/wire, sheet, film etc.
Tube: PVC tube, heat shrink tube, PVC heat shrinking tube, fiberglass tube, Teflon tube, corrugated tube, etc.
Cable: Flat cable, copper wire, etc
Tape: nickel strap, velcro, cotton tape, elastic band, plastic tape, zipper, conductive tape,foam, etc
Sheet: battory separator, Nickel sheet, diffusersheet, plastic/rubber sheet, pvc sheet,etc
Film: plastic film, reflecting film, double-sided tape, Malar film, insulation paper, PE, Copper/Aluminum foil, release paper,etc
---------------------------------------------------------------------------------------------------------
Features
1.High speed: It can cut 100~120 cut per minute. (50mm long)
2.Accuracy: Cut-length is accurate, cut length can be set between 0.1-9999.9mm.
3.Cutting type: For cold cut and Optional hot cut. Hot cut suitable for materials that needs hot sealing, such as Nylon webbing, polyester webbing, etc.
4.Automatic operation: It works automatically only by setting length and quantity. Save labor, high efficiency.
5.Automatic stopper: It stops automatically if materials run out during operation
6.Memory: Set-length, set-q'ty & set-speed are not erased even if power off & on
7.Application:The cutting machine is suitable for cutting tubes, cable, webbing/ribbon/belt, small wire, sheet and film, etc.
8.High speed, high accuracy, designed for cutting non-adhesive materials.
--------------------------------------------------------------------------------------------------------
Specification
Model: YS-100
1. Voltage: AC220V/50Hz & AC110V/60Hz
2. Power : 250W
3. Cut Length : 0.1-9999.9mm
4. Cut Width : 0-100mm
5. Cutting Thickness : 0-12mm
6. Dimension : L360*W300*H350MM
7. Net Weight : 28kg
---------------------------------------------------------------------------------------------------------
Also we have YS-120, YS-160, YS-250W, YS-300W automatic cutting machine. According to the width of the cutting materials, choose a suitable cutting machine.
Blade length of different models:
YS-100: 100mm. Power:250W
YS-120:120mm
YS-160:160mm
YS-250W: 250mm. Power: 500W
YS-300W: 300mm Power:500W
--------------------------------------------------------------------------------------------------------
For cutting tubes, according to the diameter of the tubes, choose suitable machine.
YS-100: Cut tubes with diameter less than 13mm
YS-120WH: Cut tube with diameter less than 22mm
